[Moved] maximum output current measurement

Status
Not open for further replies.
S

shinulalu6

Newbie level 4
Joined
Mar 1, 2014
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
42
hi
As you said we need to keep the opamp in voltage follower configuration and keep varying the resistive load until the voltage drops.

what in the case of capacitive load,what should we do here in order to measure the output current?

See https://www.edaboard.com/threads/266157/ for reference
 
Last edited by a moderator:

The type of load doesn't matter, so checking for the maximum op amp output current with a resistive load will also tell you the maximum current it can deliver into a capacitive load.
 

crutschow said:
The type of load doesn't matter, so checking for the maximum op amp output current with a resistive load will also tell you the maximum current it can deliver into a capacitive load.
Click to expand...



hello i have a doubt............

when my load is capacitive,will i able to measure to the maximum output current replacing resistive load.

bcz in my op-amp, open loop output impedance is high,so it is not able to drive the resistive load.


so will i get the maximum output current by keeping resistive load instead of CL....
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…