Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved]: Hspice monte carlo simulation

Status
Not open for further replies.

seethalekshmi

Newbie level 1
Joined
May 26, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Haiii,

I have done the monte carlo simulation in Hspice using 32nm technology. I used the code
.param
+ mult1=1
+ polycd=agauss(0,0.06u,1) xl='polycd-sigma*0.06u'
+ nactcd=agauss(0,0.3u,1) xwn='nactcd+sigma*0.3u'
+ pactcd=agauss(0,0.3u,1) xwp='pactcd+sigma*0.3u'
+ toxcd=agauss(200,10,1) tox='toxcd-sigma*10'
+ vtoncd=agauss(0,0.05v,1) delvton='vtoncd-sigma*0.05'
+ vtopcd=agauss(0,0.05v,1) delvtop='vtopcd+sigma*0.05'
+ rshncd=agauss(50,8,1) rshn='rshncd-sigma*8'
+ rshpcd=agauss(150,20,1) rshp='rshpcd-sigma*20'

to run the simulationby sigma varying from -3 to 3.Also obtained the .mt0 file. but does't know how to interpret the result. Can anybody help with this.

Thanks in advance.
 

erikl

Super Moderator
Staff member
Joined
Sep 9, 2008
Messages
8,112
Helped
2,689
Reputation
5,358
Reaction score
2,291
Trophy points
1,393
Location
Germany
Activity points
44,158
Re: Hspice monte carlo simulation

Could you post your result?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top