Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Motorola HC08 Programming

Status
Not open for further replies.

anttitai

Newbie level 6
Newbie level 6
Joined
Jul 15, 2002
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Finland
Activity points
11
I have few HC908GP32 - marked chips (HC08) and i like to try these. But I only have PIC experience and I need some help to get started.
Do I need special programming device and software and if where I can find these or building instructions? What compiler (C) do you recommend? It should be free or cheap enough for student.
HC908GP32 is flash device , right? So can I reprogram it again and again like PIC F-series.
 

M!k

Advanced Member level 2
Advanced Member level 2
Joined
Apr 22, 2002
Messages
681
Helped
109
Reputation
218
Reaction score
35
Trophy points
1,308
Activity points
4,822
Hi,
for a programmer have a look at this page:
**broken link removed**

Motorola (Metrowerks) has a 4k-limited version of its c-compiler. Check their webpage or search the forum for infos...


Mik
 

sc/mp

Full Member level 2
Full Member level 2
Joined
Feb 10, 2002
Messages
128
Helped
7
Reputation
14
Reaction score
6
Trophy points
1,298
Activity points
1,054
Hi,

I've made my lowcost programmer/debugger with ideas from the
following link :

**broken link removed**

The software (IDE, Compiler, Assembler and in situ debugger) is
the free CodeWarriorSE (Special Edition, 4k) from Motorola's site.

The last version includes news 8 pin versions of HC908 'Nitron'
 

ramesh

Advanced Member level 1
Advanced Member level 1
Joined
Jan 19, 2003
Messages
424
Helped
14
Reputation
28
Reaction score
14
Trophy points
1,298
Activity points
2,941
Hi

ImageCraft (ICCHC08dem.exe Version 6) also supports C compiler for HC08 microcontroller.
Have a look at their website. 30 days demo full evaluation software available. Code size limit is 64kbytes.
https://www.imagecraft.com
 

ingeom

Member level 1
Member level 1
Joined
Jan 22, 2002
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
131
The hc908gp32 is 40DIP with 32kb flash memory and 512 byte RAM. It can be erase more than 40k. There are many tools for it. For instance, cosmic, metrowerks, pemicro, Bytecraft, iar, image craft.
This mcu is self programming using the following circuit.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top