Mosfet selection for high ampere application

Status
Not open for further replies.

varunme

Advanced Member level 3
Joined
Aug 10, 2011
Messages
741
Helped
17
Reputation
36
Reaction score
17
Trophy points
1,318
Activity points
5,764
for the order of 60A, which MOSFET will be suitable in parallel?
 

You have not mentioned d voltage rating...u can use
1)IRFZ48(60V,50amp,Ron=.018ohm)
2)IRF540(100V,28amp,Ron=.077ohm)
3)APT5025BN(500V,23amp,Ron=.25ohm)

If u r planning to use a single module instead of paralleling,u can use
1)APT10M25BNR(100V,75amp,Ron=.025ohm)
 
Reactions: varunme

    varunme

    Points: 2
    Helpful Answer Positive Rating
Use 80N30 or IRF3205, both are good MOSFET.
 
Reactions: varunme

    varunme

    Points: 2
    Helpful Answer Positive Rating
If the frequency of the switching is of the order of 100Khz can we used these mosfet?
 

Hi,

Manufacturers and distributors have interactive selection guides.

There you will finde the right device.

Klaus
 
Reactions: varunme

    varunme

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…