Hello rokai1990
u can not use high side driver of the IR2110 as the source of the MOSFET does not reach zero voltage (Vin when MOSFET is on and Vx when MOSFET off), So, the bootstrap capacitor will not charged, So, the MOSFET will not turn on.
u can use the low side driver of the IR2110, but u will use another supply for firing process(12v supply), the GND of that supply will connected to the source leg of the MOSFET and the 12v enters to the MOSFET gate according to the firing signals on the LIN pin.
Also u can use other firing ICs such as TLP250 opto.
Note that the MOSFET that i talking about is N channel MOSFET