samisilicon
Newbie level 4
- Joined
- Apr 14, 2013
- Messages
- 5
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,323
Hi,
I am running MC simulations on a simple single MOSFET common source amplifier. Fig 1 shows my MC analysis setup. I am getting variations in both the AC and Transient simulations (Fig 2). But I am not getting histograms for my outputs. Even after precessing the tab for "Post Processing operations for monte carlo" and opening the histogram window (Fig 3), the output for which I need to have histogram is missing. Instead in this window there are variables I am not familiar with like the first one 'aclv_h_ags', I mean what kind of process parameter is it. I am even struggling to find this parameter in PDK model file.
I have tried many things like checking all tabs in 'ADE XL Plotting/Printing Options' window. ( 'Set up Plotting Options' tab. ). Help me!
I am running MC simulations on a simple single MOSFET common source amplifier. Fig 1 shows my MC analysis setup. I am getting variations in both the AC and Transient simulations (Fig 2). But I am not getting histograms for my outputs. Even after precessing the tab for "Post Processing operations for monte carlo" and opening the histogram window (Fig 3), the output for which I need to have histogram is missing. Instead in this window there are variables I am not familiar with like the first one 'aclv_h_ags', I mean what kind of process parameter is it. I am even struggling to find this parameter in PDK model file.
I have tried many things like checking all tabs in 'ADE XL Plotting/Printing Options' window. ( 'Set up Plotting Options' tab. ). Help me!
