Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Missing schematic can anyone solve this? (hot air soldering station)

Status
Not open for further replies.

RAV1965

Newbie level 6
Joined
Jan 17, 2020
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
102
I would like to build a hot soldering station. I have found an instructible that I like, but no schematic was included, so it seems impossible. I have looked for other projects that do the same thing, but have had no luck. Is there someone here that could look this over and supply the missing information?

Thanks

https://www.instructables.com/id/Home-Make-a-Cheap-Hot-Air-Soldering-Station/
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
50,810
Helped
14,603
Reputation
29,481
Reaction score
13,688
Trophy points
1,393
Location
Bochum, Germany
Activity points
290,938
Re: Missing schematic can anyone solve this?

PCB wiring and component values are given, you can easily sketch a schematic yourself.
 

RAV1965

Newbie level 6
Joined
Jan 17, 2020
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
102
Re: Missing schematic can anyone solve this?

PCB wiring and component values are given, you can easily sketch a schematic yourself.

I looked the information over and didn't see that. Are you referring to the picture that shows the pcb and where the components go? If so then that doesn't tell me what connections there are.

I am an electronics newbie is why I posted here to get help from people who know much more than me.
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
50,810
Helped
14,603
Reputation
29,481
Reaction score
13,688
Trophy points
1,393
Location
Bochum, Germany
Activity points
290,938
You get all information by combining the b/w assembly drawing and the black/blue/green image of PCB traces.
 

RAV1965

Newbie level 6
Joined
Jan 17, 2020
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
102
You get all information by combining the b/w assembly drawing and the black/blue/green image of PCB traces.

OMG!!! Sorry I didn't see that picture that show the traces before. That does make it possible to make the schematic and do this project.

I may be asking other questions about this in the future though :)

Thanks

- - - Updated - - -

I may be asking other questions about this in the future though :)

Thanks

I am trying to put all my components on a page and I come to 'IC TL431'. I want to verify that I am finding the right chip so I look to the picture. It shows a 6 pin chip that is not labeled and I'm guessing that is the TL431. All the TL431 that I can find are either 8 pin chips or 3 leg components.

Any ideas?
 

d123

Advanced Member level 5
Joined
Jun 7, 2015
Messages
2,502
Helped
494
Reputation
992
Reaction score
525
Trophy points
1,393
Location
Spain
Activity points
27,127
'IC TL431'. I want to verify that I am finding the right chip so I look to the picture. It shows a 6 pin chip that is not labeled and I'm guessing that is the TL431. All the TL431 that I can find are either 8 pin chips or 3 leg components.

Hi,
Page 4 of the TI TL431 datasheet, 6-pin package:

TL431
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top