Jan 9, 2012 #1 V Vermes Advanced Member level 4 Joined Aug 2, 2011 Messages 1,163 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,316 Activity points 22,318 The entire device was made of screwed aluminum profiles, filled with cement in order to increase the weight. weight: 60kg workspace: 300x300x250mm stepper motors 3Nm fences X, Y, 25mm diameter, 500mm length fences Z, 20mm diameter, 500mm length linear bearings trapezoidal screws 12mm diameter, 3mm stroke nylon nuts drivers up to 25 000 microsteps 4A heated table to melt thermal adhesive used to attach the work piece – mainly wood spindle 1050W, 11000-30000 r/min milling accuracy greater than 0,1mm milling max speed for 6-8mm mill – 400 mm/min control program step2cnc Lathe: serial engine with a tachometric generator about 1000W head – turning handle with a diameter of 80mm turning knife attached to the Z axis Link to original thread (useful attachment) – Frezarka tokarka CNC
The entire device was made of screwed aluminum profiles, filled with cement in order to increase the weight. weight: 60kg workspace: 300x300x250mm stepper motors 3Nm fences X, Y, 25mm diameter, 500mm length fences Z, 20mm diameter, 500mm length linear bearings trapezoidal screws 12mm diameter, 3mm stroke nylon nuts drivers up to 25 000 microsteps 4A heated table to melt thermal adhesive used to attach the work piece – mainly wood spindle 1050W, 11000-30000 r/min milling accuracy greater than 0,1mm milling max speed for 6-8mm mill – 400 mm/min control program step2cnc Lathe: serial engine with a tachometric generator about 1000W head – turning handle with a diameter of 80mm turning knife attached to the Z axis Link to original thread (useful attachment) – Frezarka tokarka CNC