Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Milling machine – Lathe CNC

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,331


The entire device was made of screwed aluminum profiles, filled with cement in order to increase the weight.
  • weight: 60kg
  • workspace: 300x300x250mm
  • stepper motors 3Nm
  • fences X, Y, 25mm diameter, 500mm length
  • fences Z, 20mm diameter, 500mm length
  • linear bearings
  • trapezoidal screws 12mm diameter, 3mm stroke
  • nylon nuts
  • drivers up to 25 000 microsteps 4A
  • heated table to melt thermal adhesive used to attach the work piece – mainly wood
  • spindle 1050W, 11000-30000 r/min
  • milling accuracy greater than 0,1mm
  • milling max speed for 6-8mm mill – 400 mm/min
  • control program step2cnc
Lathe:
  • serial engine with a tachometric generator about 1000W
  • head – turning handle with a diameter of 80mm
  • turning knife attached to the Z axis



Link to original thread (useful attachment) – Frezarka tokarka CNC
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top