mikroC code problems

[noor007]

unsigned spd,dirc,temp ;
unsigned st=0 ;

// OUTPUT

#define S_ON PORTA.F0 //
#define D_OUT PORTA.F1 //
#define SPD_1 PORTA.F2 //
#define SPD_2 PORTC.F0 //
#define SPD_3 PORTC.F1 //
#define STATUS PORTC.F4 //
#define BREAK PORTC.F5 //

// INPUT

#define S_RUN PORTA.F3 //
#define D_IN PORTC.F2 //
#define ALRM PORTA.F5 //
#define S_RDY PORTA.F4 //
#define SPD PORTC.F3 //


void main() {

CMCON =0 ; //COMPATATOR OFF
ANSEL =0b11000000 ; //
ADCON0.VCFG =0 ; // Vdd as Vref
INTCON =0 ; // disable all interrupts

TRISA = 0b00111000 ; //
TRISC = 0b00001100 ;

PORTA=0 ;
PORTC=0 ;


//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

//test

S_ON =1 ;
Delay_ms(1000) ;
SPD_1 =1 ;
Delay_ms(1000) ;
D_OUT=1 ;
Delay_ms(1000) ; //
SPD_2 =1 ;
Delay_ms(1000) ; //
SPD_3 =1 ;
Delay_ms(1000) ; //
STATUS =1 ;
Delay_ms(1000) ; //
BREAK =1 ;
Delay_ms(1000) ; //

do {}while(1);

}

hi,
my problem is S_ON is not stable,when D_OUT is turn on ,S_ON is automatically turn off .my another part is OK .my MCU pic1f675.it is written at mikroC 8.

please help some one.

 

[sandipm14]

Please recheck your output data.
and confirm the same.

 

[betwixt]

Which processor are you using? There is no such device as 16F675 and if it's a 12F675 it doesn't have a PORTC.

Brian.