Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] microcontroller with buil-in ethernet and 4 serial ports

Status
Not open for further replies.

melsayedhasan

Newbie level 3
Newbie level 3
Joined
Nov 24, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
20
Hello, can you help me fine a cheap microcontroller with 4 serial ports and one Ethernet port.
 

I would use an FPGA-based SOC with UARTS built in the FPGA fabric. That way you can have as many UARTS as you need. My suggestion is the Microsemi SmartFusion AFS050. Dev tools are free and design should be straightforward. The micro is a Cortex-M3 @ 100MHz
 

you can use STM32 or NXP 32-BIT MICROCONTROLLER ,it's have more than five UART...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top