microcontroller learning as a beginner

[abdullah65]

want to learn and make project with microcontroller.... need some references such as books, tutorials, etc....plz help.

 

[vasanth kumar]

refer "microcontroller" by Ajay v deshmukh.

- - - Updated - - -

the microcontroller 8051 by scott meckenzie is a very good resource to learn and do projects with 8051.

 

[PA3040]

want to learn and make project with microcontroller.... need some references such as books, tutorials, etc....plz help.

Hoped this will helped
**broken link removed**

https://www.mikroe.com/products/view/11/book-pic-microcontrollers/

 

[themask]

**broken link removed**

 

[bhuwanmadan72]

Here's a book for 8051 microcontroller. This book is good and have detailed explanation for everything

**broken link removed**

and here's a link for projects in 8051

http://www.engineersgarage.com/microcontroller/8051projects

 

[tushki7]

Greetings,
https://books.google.co.in/books/about/The_8051_Microcontroller_And_Embedded_Sy.html?id=8t0gVhfUGXUC&redir_esc=y
The 8051 Microcontroller And Embedded Systems Using Assembly And C - Mazidi ..

As for Microcontroller go with P89V51RD2 for two reasons:
Very Easy to program
Easy to build programmer for it(cheap too).

Good Luck

 

[Raady Here]

learning a micro controller with C language would be easier for you.
Start with any kind of 8 bit microcontroller.
There is no such kind of books where you can learn every thing about a micro-controller except than the data sheet.
I insist you to learn the development by reading a data sheet than a particular book, you use internet to search sample examples, and many available to help you out when you are struck, with help of Forums.

 

[tushki7]

learning a micro controller with C language would be easier for you.
Start with any kind of 8 bit microcontroller.
There is no such kind of books where you can learn every thing about a micro-controller except than the data sheet.
I insist you to learn the development by reading a data sheet than a particular book, you use internet to search sample examples, and many available to help you out when you are struck, with help of Forums.

I have a different opinion.. For any beginners they must have some knowledge about general Micro-controllers parts(registers, clocks, ports etc.), how to program basic Micro-controller, how to run basic programs etc. They wont find it on a datasheet, and many times datasheets are not so clear about this. You have to follow some book, tutorials or use google.
Which is easier C or Assembly Language? It is a long known fight between ASM and C language, if you search forum you will find many posts related to such topic. Try both for the first time and decide yourself which path do you want to take. Sometimes we have to use combination of both ASM & C both in program.
And yes you will find help in this and other forums, but before posting your problem first search for similar threads.
Have a nice day.
Good Luck !!!