Microblaze and opencore processor

[manno]

Hi everybody,

I'm a beginner in FPGA and I need your help.
I'm working with EDK 12.4 and ML507 VIRTEX5 board. My goal is to connect the MBLite opencore processor to the Xilinx Microblaze. The problem is that MBLite support only Wishbone bus as interface or the Microblaze can support FSL and PLB Bus. In this situation, the two softcores processors don't have the same bus support.
I want to know if there is a solution to interface the MBLite with Microblaze?

Thanks in advance.

 

[ads-ee]

If there isn't an off the shelf solution, then you are the solution...You design a Wishbone to PLB/FSL bridge and add it as a Xilinx platform studio IP.

 

[manno]

If there isn't an off the shelf solution, then you are the solution...You design a Wishbone to PLB/FSL bridge and add it as a Xilinx platform studio IP.

Thanks for your reply.
Could you give me any links which help me to start with implementing this interface.

I would be very grateful.