Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

measuring and testing video signals?

Status
Not open for further replies.

walters

Advanced Member level 2
Joined
Jun 5, 2005
Messages
599
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
7,730
How do i measure Video signals? with the oscilloscope?

What do Video signals look like for TV's? and VCRs?

How do i Test video signals?
 

hani51

Junior Member level 3
Joined
Jan 16, 2002
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
204
i prefer to measure the baising voltages on semiconductor devices firs
then you can chech the intermediate frequancy stage and change the osciliscope time base till you get periodial signal which is the horizontal scanning signal and you will recognize in between adjacent signals a varaiable signal which is one line of transmittd signal
 

walters

Advanced Member level 2
Joined
Jun 5, 2005
Messages
599
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
7,730
tv signal has::

How do i measure and test horizontal sync?

How do i measure and test vetical sync?

How do i measure and test blanking pulses?

How do i measure and test message(0-5mhz)?

How do i measure and test sync pulses are to make synchronization between the receiver and transmitter?

How do i measure and test scanned interlaced? (whose trace and retrace is controlled by the sync pulses).

How do i measure and test the horizontal scanning signal?

How do i measure and test the Vertical scanning signal?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top