Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Mains Pump Driver with opto-triac driver.

Status
Not open for further replies.

eem2am

Banned
Joined
Jun 22, 2008
Messages
1,180
Helped
37
Reputation
74
Reaction score
23
Trophy points
1,318
Activity points
0
Hello,

This is a schematic for a Mains pump motor driver.

http://i54.tinypic.com/zyeiw7.jpg

Do you believe that the "H/L" input is for selecting wither UK or USA mains? (i.e. 120VAC or 240VAC?)

MOC3063 DATASHEET:
http://www.fairchildsemi.com/ds/MO/MOC3063-M.pdf

Also, MOC3063 is a zero-crossing opto-triac driver, surely this is unsuitable for IC2?

.....because surely that opto-triac driver (IC2) should just be either ON or OFF all the time, depending on whether its 120VAC or 240VAC?
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top