Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

lumped capacitance simulation in hfss

Status
Not open for further replies.

abhi_kolkata

Member level 5
Joined
Oct 5, 2005
Messages
84
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
2,116
hfss lumped element

hi,

i am new to hfss design environment.i want to know how to define lumped capacitance (lumped rlc boundary condition). suppose i want to place it in the gap of a grounded cpw structure.

waiting for replies.

with regards
abhi
 

lumped element in hfss

hi,

anyone plz do help me. i really need to know it to complete my project work.

hoping for replies.

with regards
abhi
 

lumped capacitance

Cn you use only HFSS or all the Ansoft Designer?
With Designer I think you can use the EM simulation result from HFSS with the linear simulator.

Bye
 

lumped element hfss

Hi,

Actually i'm new to this forum; so the reply may be late :(

To assign a Lumped RLC,
* create a sheet, where you assign this lumped element (you need to execute "detach faces" under 3d modeler, surfaces)
* right click on the sheet you created:
-Assign boundary > Lumped RLC

* in the dialog box, enter the r, l, c values you want.
* do not forget to define the line, which indicates the direction of the current flow.

good luck ;)
 
capacitance simulation

Hi, the attachment is a brief introduction to use RLC boundary in HFSS
I think it should help you to understand how HFSS deal with the lump sheet.
 

Attachments

  • appnotelumpedrlc_4519.pdf
    218.3 KB · Views: 859
hfss assign lump rlc

Thanks A LOT:D!This stuff is amazing! solved a big problem which was bugging me for a quite long time!
 

finding capacitance with hfss

ansoft products can be linked to each other.
the best way for simulating lumped elements and em structures is using "Hfss" with "Ansoft Designer".
be successful
 

what is the lumped capacitance

very good. I also want it now...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top