aryajur
Advanced Member level 3
- Joined
- Oct 23, 2004
- Messages
- 793
- Helped
- 124
- Reputation
- 248
- Reaction score
- 37
- Trophy points
- 1,308
- Location
- San Jose, USA
- Activity points
- 7,788
Hello,
I have a signal vector and I wanted to low pass filter it. My knowledge of discrete filters is very limited so any help would be greatly appreciated.
My signal is basically a sampled instance of a sum of sinusoids of 100Hz and 1KHz. What I want to do is basically filter this sampled signal so that I am just left with the 100Hz signal and then plot the resulting signal.
So basically I just need a low pass filter with a cut off frequency of 200Hz and large attenuation at say 800Hz and beyond.
Any leads, help would be appreciated.
Thanks.
I have a signal vector and I wanted to low pass filter it. My knowledge of discrete filters is very limited so any help would be greatly appreciated.
My signal is basically a sampled instance of a sum of sinusoids of 100Hz and 1KHz. What I want to do is basically filter this sampled signal so that I am just left with the 100Hz signal and then plot the resulting signal.
So basically I just need a low pass filter with a cut off frequency of 200Hz and large attenuation at say 800Hz and beyond.
Any leads, help would be appreciated.
Thanks.