Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for easy to use USB interface chip

Status
Not open for further replies.

politicante

Member level 2
Member level 2
Joined
Feb 24, 2002
Messages
46
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
270
which is the easiest way to build an usb interface? I mean where can i find an usb chip like usbn9602 from national in Europe?
 

pdiuab

"which is the easiest way to build an usb interface? I mean where can i find an usb chip like usbn9602 from national in Europe"

FTDI chips are really easy and they supplement free no-royalty drivers.

Pls check https://www.ftdichip.com/
 

You can try TITUSB3210 ,it USB ctrl Mcu by 8x51.
 

Hi,

Also try the PDIUSBD12 chip from Philips - being in Europe, it might be easier to get !

This is also a easy to use USB interface chip.

Regards,

Smokey
 

Possibly useful lnk related to the
PDIUSB device :

**broken link removed**

FTDI EU dealr S.O.S. electronics Italy.

PDIUSB may appeal for larger volumes, FTDI for quickier lower volume dls.FTDI initially seems easier sw-wise.
 

Thanks a lot guys!
Now getting to work....:smile:!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top