Looking for documents about the RF and Microwave Combiner

Status
Not open for further replies.
L

lefrancais

Junior Member level 1
Joined
Oct 12, 2006
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,386
Combiner ...

hello everybody.

It is maybe a very easy question for someone...but...

Please

someone can give me a web site address or a documentation about the RF and microwave Combiner.

I know what is this device, but i would to know more about this device, electric schematic with inductor and capacitor for example.

thanks
 

Re: Combiner ...

you can read more in Pozar book...
 

Re: Combiner ...

Hello

thanks for your help,
but
I would like to know more NOT about the power combiner/splitter but
about the combiner/splitter where in input ( for a combiner ), we send different signal frequency.
Frequency 1 and frequency 2 in input 1 and input 2 ( for a combiner ) and receive in output the two frequencies together...
I think i must insert some filters inside ???

Do you have this kind of document.

thanks
 

Re: Combiner ...

Hi, lefrancais

If i understand you right then you want to inser to signals, let say 1GHz and 1.1GHz into port in 1 and port in 2. and you want that on port 3 out will be 1 GHz and 1.1 GHz.

if that's right then you didn't read what i send you. this is exactly what power divider/combiner do!!

the power divider can do two things !. it can split one input to two output or it can do what you need combine two signal on the input to one output. and it's does not mater if the freq. at the output are deffirents.

i upload a picture of ADS that show two signals in the input and one at the output .



 

Re: Combiner ...

rancohen_2000

So the frequencies in input the same or not is not a problem...
Ok thanks for the schematic from ADS, I reconise... this software.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…