I think none of the viewers has understood my request properly.
I ask you to help me getting started with VLSI engineering. My request is that I'm need of details about VLSI engineering, How to get started with it and the tools that are mainly required for that!
I think none of the viewers has understood my request properly.
I ask you to help me getting started with VLSI engineering. My request is that I'm need of details about VLSI engineering, How to get started with it and the tools that are mainly required for that!
Here is a vlsi tool for you to practise. note dos version
What is Magic Version 6?
This version of Magic gathers together work done by numerous people at several institutions since Magic version 4 was released from Berkeley on the 1986 VLSI tools tape. Version 6 is a release of Magic and IRSIM. You'll probably want to obtain other tools by ordering the 1986 VLSI Tools Tape from Berkeley.
This release has been prepared with the assistance of several groups. Much of the new software came from Walter Scott's group at the Lawrence Livermore National Labs (LLNL). LLNL also provided partial funding to help prepare the release. Digital Equipment Corporation's Western Research Lab (DECWRL) helped out by providing computer equipment, a place to work, and the services of one of us (Robert Mayo). Don Stark, Michael Arnold, and Gordon Hamachi also worked on the release at DECWRL. Stanford donated significant pieces of new code, including a simulation system called IRSIM. Other individuals and institutions have also contributed code and assistance in ways too numerous to detail here. [/code]fxp://ftp.digital.com/pub/DEC/WRL/projects/magic/pc/dosmagic.zip
first of all decide if u want to work on the analog side or digital side
if u dont mind either o fthe two
u can work on mixed signal ...
for analog -read analog ic design by jonas and martin...the best book of starters
for digital-first read the book on digital electronics by wakerli
ur knowledge hin digital electronics is of profound importance..
then u can start learnin either verilog or vhdl..
i would prefer verilog becos its more used in industries today
good luck