i want to move stepper motor and the steps of the stepper motor ( step every as example to 15 minutes) how can makeing the stepper to waiting for 15 minutes and after that move 7.5 degree >>> who can help me by give me good code for that and give me some informations about project has same operation
i will thanks very much for this help >> pleaz dont forget me i donot have any experinces about the stepper motors codes formulas
i'm using Assembly language and my pic is pic16f84a
notice that i want my stepper motor movements is automatically i mean that without i stoped its movement unless when i want to stop>> its movment according the code only ....
step move and waiting 15 minutes and step and waiting and etc....
So instead of the 555 and the FF all you need is code for 2 outputs in 90 degrees offset 10, 11, 01, 00...
The power on delay set first FF to High and the second FF to LOW to fixed the motor direction
The 3717 is obsolete so you need to find another steeper driver
You don’t need the power on speed ramp its for soft start for free running motor
you need motor with 7.5 degree for 1 step