Hicham M
Member level 1
- Joined
- Feb 1, 2014
- Messages
- 38
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Activity points
- 321
Hello guys,
I'm planning to build an automatic test bench. Basically, rather than staying all day turning on and off inputs and pushing buttons, powering off and on the device manually. I was to make this an automatic task.
So I would require a board that has at least 15 digital outputs, 5 inputs ( 2 CAN buses optional ) and a USB interface to control these outputs pins.
And this board should come with a software to schedule the switching for each output easily. a custom software or a generic one would both work, the important thing is that the scheduling would be easily done.
Do you know guys where I can find boards that full fill my requirements ?
I'm planning to build an automatic test bench. Basically, rather than staying all day turning on and off inputs and pushing buttons, powering off and on the device manually. I was to make this an automatic task.
So I would require a board that has at least 15 digital outputs, 5 inputs ( 2 CAN buses optional ) and a USB interface to control these outputs pins.
And this board should come with a software to schedule the switching for each output easily. a custom software or a generic one would both work, the important thing is that the scheduling would be easily done.
Do you know guys where I can find boards that full fill my requirements ?