Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for a job related to ASIC design

Status
Not open for further replies.

hunter

Newbie level 4
Joined
Mar 25, 2003
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
95
Job hunting

Hi, all
Looks like it's the first post in the forum. For some reason, a SR. ASIC Design engineer is looking for an ASIC Design opptunity. currently I live in Silicon Valley,ca,US. have almost ten chips successfully tape-outs(under .18, timing critical) including some big chips came from big company, such as yamaha, ubicom, toshiba etc. Focusing on back-end, very good person to challenge the timing critical, multi-million designs. cause I used to be front-end designer.
details according to some of my chips:
dsp: 600K,330M, 0.13um,
risc cpu: 400K,300M, 0.18um.
network chip: 500K,250M, 0.15LV.
network chip: 5M, 240M, 0.13um,12clock domains, 4power domains.
SOC chip: 5M, 200M, 0.13u, (ongoing)

any information will be highly appreciated.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top