Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LLC Half Bridge with split resonant capacitors?

Status
Not open for further replies.

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,562
Helped
54
Reputation
108
Reaction score
112
Trophy points
63
Activity points
13,471
Hi,
Pages 8,9 and 61 (of the below) give the many advantages of doing a Half Bridge LLC with split resonant capacitors.
The best one to me sounds like the reduction in magnetising current peak at start-up, or during return from temporary shutdown.
They don’t give any disadvantages though…there must be some?…..what about if the tolerance of the two splits is different , and they present slightly different capacitance, then surely this will adversely affect things?

 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top