Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Learn not copy and paste(0 to 99 in mikroc) counting

Status
Not open for further replies.

alimemory

Junior Member level 1
Joined
Jun 19, 2014
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Nigeria
Activity points
119
Hi step by step i will get anything i want
2 days back i learned how to drive 7segment.
worked normal from 0 to 9.
I need help,idea path,explanation to continue it from 9,10,11,12,13........you wish.
Thanks¡î¡î¡î¡î¡î¡î¡î¡î¡î¡î¡î¡î¡î¡î
 

LCD Interfacing
MikroC Pro Code
Code:
// LCD module connections
sbit LCD_RS at RB3_bit;
sbit LCD_EN at RB3_bit;
sbit LCD_D4 at RC4_bit;
sbit LCD_D5 at RC5_bit;
sbit LCD_D6 at RC6_bit;
sbit LCD_D7 at RC7_bit;
sbit LCD_RS_Direction at TRISB2_bit;
sbit LCD_EN_Direction at TRISB3_bit;
sbit LCD_D4_Direction at TRISC4_bit;
sbit LCD_D5_Direction at TRISC5_bit;
sbit LCD_D6_Direction at TRISC6_bit;
sbit LCD_D7_Direction at TRISC7_bit;
// End LCD module connections
void main()
{
 Lcd_Init(); // Initialize LCD
 Lcd_Cmd(_LCD_CLEAR); // Clear display
 Lcd_Cmd(_LCD_CURSOR_OFF); // Cursor off
 Lcd_Out(1,1,"Hello World");//Write text'Hello
World' in first row
}
LIKE THIS?
 
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top