ahonda55
Newbie level 3
Hello, I am building a timer which produced a pulse after a desired time, the time fractions are in milliseconds, and i need to show the desired timer setting on a standerd LCD.
it should start from 0.1..0.2..0.3......0.9..1.1..........5.0
from 0.1sec to 5 seconds.
I just need a code to increase a number by 0.1 to reach 5.0, then show the number on the LCD. That's all
Any help is apreciated a million
Thanks in advance.
it should start from 0.1..0.2..0.3......0.9..1.1..........5.0
from 0.1sec to 5 seconds.
I just need a code to increase a number by 0.1 to reach 5.0, then show the number on the LCD. That's all
Any help is apreciated a million
Thanks in advance.