lcd control program for my DE2 board - HELP PLEASE...

Hello,

i'm a student and am experimenting with an Altera DE2 Board.
i have wrote my own code in VHDL for operating the LCD module of the Board.
the code is divided into 2 files:
lcdctrl.vhd - a component for driving the HITACHI HD44780U contoller on the board
lcdtst.vhd - a small entity designed to get instructions from the boards switches and input them into the LCDctrl component...to check how it works before i combine the component in my other projects...
*both files are attached to this msg...

And now...the problem,
i'm working with Quartus 11.1sp1.
the files pass all necessary stages of compilation and in the end there is a msg that says it was successful, but when i try to program the SOF file into the Board (JTAG mode) it fails to program it in...

PLEASE HELP...
10x,
Tomer.

What was the failure message - its unlikely to be a problem with the code.

this was the error reported:
"

Error (209012): Operation failed
Error (209015): Can't configure device. Expected JTAG ID code 0x020B50DD for device 1, but found JTAG ID code 0x020B40DD.
Error (209015): Can't configure device. Expected JTAG ID code 0x020B50DD for device 1, but found JTAG ID code 0x020B40DD.
"

10x...after i read this error i noticed the device was not correct.i changed it to the right one and it worked gr8 !!!
:lol:

i feel foolish now for not checking it in the first place.

good night ! & HAPPY NEW YEAR !!!!!!!!!!