hi all
i wantto know if i can use serial port with 9 pins"DB9" with JDM programmer or not
since it uses serial port with 25 pins "DB25" and i dont has this serial port in my pc
The Olimex and TE-20 is a JDM. I tried the original JDM programmer but it didn't work very well, also, I had no DB-25.
I found a JDM based programmer compatible with many Microchip PIC (8 to 40 pins). It is similar to the previous one, also there is some tips to make it work if you have any problem with it.