Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Is reading output of SERDES TLK1501 is possible using PC ethernet port

Status
Not open for further replies.
S

suryakant

Member level 5
Member level 5
Joined
Mar 10, 2005
Messages
90
Helped
6
Reputation
12
Reaction score
0
Trophy points
1,286
Location
India
Visit site
Activity points
2,171
Hi,

I have a device which sends serial data @ 1gbps using TI's TLK1501 using proprietary poin to point protocol (does not use ethernet frame) just like simple serial protocol. Can I fed this data to Ethernet port of PC with Gigabit network adapter and read it?
How do I read data available at physical layer of ethernet with software?

I don't have logic analyzer.

Thanks.
 

The physical layer used by this interface is completely different from Gigabit Ethernet over twisted pair (1000BASE-T sublayer). You may want to review IEEE802.3 for a description of the different physical ethernet layers.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top