Hello everybody.. I am working on project and i need to send some data from PC to PIC. For this purpose i want to use rf module to send data. So is possible to connect rf transmitter to PC through rs 232 port ?
if you google RF transmission module, you will find some really good module and read the data sheet of it. that's the best source to read and learn new things
Man i have already done those stuffs what i need to know is : how can i connect rf module to pc ( this information is not avaliable in data sheet ), do i need interface and where can i find code for this interface
try "hyper terminal" of your PC....you can send and receive data from hyper terminal. You will find Hyper terminal in Start>programmes>accessories>communications.
it may be helpful
I dont think you need any ciruit and I have my doubt about video as I have never try it before regarding this. If you get understanding about Hyper terminal and try your module working on it. good luck
Yes it is possible,modules may simulate the RS232 port in its software,and you can connect the module with PC easily by cable.
I can show you some module infromation,you can contact me via
:?msn:shelly-hac@htomail.com
---------- Post added at 07:17 ---------- Previous post was at 07:16 ----------