Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ip camera + gprs/edge connection ?

Status
Not open for further replies.

bumerang

Member level 2
Joined
Sep 10, 2002
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
229
Hi,

How can use IP (network) camera with GPRS or EDGE connection, I have GPRS/EDGE module on the hand, can I use just serial to ethernet bridge ? or what kind of device I need ?

Thank you for advice.
 

kishore2k4

Full Member level 5
Joined
Jun 17, 2006
Messages
296
Helped
44
Reputation
88
Reaction score
10
Trophy points
1,298
Location
Middle Earth
Activity points
3,295
If your GPRS/edge module supports AT command set then you'll need to design a converter to do the translation from ethernet frames to modem data. This can be rather elobarate.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top