Kryptone
Member level 3
- Joined
- Mar 14, 2014
- Messages
- 64
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 8
- Activity points
- 552
Hello,
I have connected the dc-dc converter of 181 Vdc to the inverter, the noise from the transformer has stopped and there is no flickering and I get an ac output but it is low like about 20 V-AC and a 20W bulb connected at the output with 14.9V input and about 12 V-AC with 12V input with no load I get about 22 V-AC. What could be the problem????
Please help!!!!!!!
I am wondering if the impedance of the inductor could be the problem? I dont know the value of the inductor I got it from a UPS board and it has 4 pins so i just used 2 diagonal pins
I have connected the dc-dc converter of 181 Vdc to the inverter, the noise from the transformer has stopped and there is no flickering and I get an ac output but it is low like about 20 V-AC and a 20W bulb connected at the output with 14.9V input and about 12 V-AC with 12V input with no load I get about 22 V-AC. What could be the problem????
Please help!!!!!!!
I am wondering if the impedance of the inductor could be the problem? I dont know the value of the inductor I got it from a UPS board and it has 4 pins so i just used 2 diagonal pins
Last edited: