avirajose
Junior Member level 3
- Joined
- Nov 28, 2011
- Messages
- 29
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- India
- Activity points
- 1,491
Hi,
I just bought a "Babel Buster BB2-6040 Mod-bus to ZigBee Gateway" (**broken link removed**) module. I am trying to integrate my Zigbee board (https://www.ti.com/tool/smartrf06ebk) with BB2-6040 Mod-bus to ZigBee Gateway but its not happening.
Is anyone using this gateway. I am not able to configure the gateway. My module is not detected in Zigbee->diagonostics->Nodelist page.
I am able to do board to board zigbee communication.
My board is programmed with sample code and can also be controlled by a Software (https://www.ti.com/tool/SMARTRFTM-STUDIO?keyMatch=smartrf&tisearch=Search-EN) to initiate zigbee transmission.
On initiating transmission from my module i am able to see the zigbee packets in my PC through packet snifffer provided by Ti (https://www.ti.com/tool/cc2531emk)
On going through the "BB2-6040-UserGuide", i found my device should be configutred with BB2-6040 (ZS parameter).
what is ZS parameter? I try to google it but was not able o find it.
So please help me how to configure my device as ZS parameter.
Can i see the Zigbee packets send from "Babel Buster BB2-6040 Mod-bus to ZigBee Gateway" in packet sniffer i mentioned before.
Waiting for your reply,
Regards,
Jose
I just bought a "Babel Buster BB2-6040 Mod-bus to ZigBee Gateway" (**broken link removed**) module. I am trying to integrate my Zigbee board (https://www.ti.com/tool/smartrf06ebk) with BB2-6040 Mod-bus to ZigBee Gateway but its not happening.
Is anyone using this gateway. I am not able to configure the gateway. My module is not detected in Zigbee->diagonostics->Nodelist page.
I am able to do board to board zigbee communication.
My board is programmed with sample code and can also be controlled by a Software (https://www.ti.com/tool/SMARTRFTM-STUDIO?keyMatch=smartrf&tisearch=Search-EN) to initiate zigbee transmission.
On initiating transmission from my module i am able to see the zigbee packets in my PC through packet snifffer provided by Ti (https://www.ti.com/tool/cc2531emk)
On going through the "BB2-6040-UserGuide", i found my device should be configutred with BB2-6040 (ZS parameter).
what is ZS parameter? I try to google it but was not able o find it.
So please help me how to configure my device as ZS parameter.
Can i see the Zigbee packets send from "Babel Buster BB2-6040 Mod-bus to ZigBee Gateway" in packet sniffer i mentioned before.
Waiting for your reply,
Regards,
Jose