shaikss
Full Member level 4
- Joined
- Jun 18, 2007
- Messages
- 229
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,298
- Activity points
- 3,319
Hi Folks,
I need help regarding the interfacing of Zigbee transceiver with GSM module.
We had built Saline monitoring circuit. Whevnever there is no fluid passage into the body, the circuit will give an alert.
For this, we have IR LEDS to monitor the passage of fluid. In addition, we had used Zigbee transceiver TI's CC2530 kit to send the data across Zigbee Mesh network. There is a LED on the CC2530 transceiver kit which glows when there is no passage of fluid.
We had planned to send SMS to central nursing station if there is no passage of fluid.
Pls help me out how to interface GSM with Zigbee. It has some GPIO pins and SPI interface.
I need help regarding the interfacing of Zigbee transceiver with GSM module.
We had built Saline monitoring circuit. Whevnever there is no fluid passage into the body, the circuit will give an alert.
For this, we have IR LEDS to monitor the passage of fluid. In addition, we had used Zigbee transceiver TI's CC2530 kit to send the data across Zigbee Mesh network. There is a LED on the CC2530 transceiver kit which glows when there is no passage of fluid.
We had planned to send SMS to central nursing station if there is no passage of fluid.
Pls help me out how to interface GSM with Zigbee. It has some GPIO pins and SPI interface.
Last edited: