Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing Ammeter with PLC

Status
Not open for further replies.
A

ayyub

Newbie level 6
Joined
Jul 11, 2008
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,384
ammeter plc

I got a Diesel Generator with indications::"RPM Meter","Voltmeter" and "ammeter".Now im willing to interface the ammeter with my PLC.I got an analog module of my PLC.So inorder to interface the ammeter with my PLC the ammeter should give analog output so that it would be easy for me to directly interface ammeter with PLC analog module.
Actually im willing to measure the current using the city transform and it is giving 0.11Amps on 1000W.So what should i do to have voltages and it would be easier for me to interface with the PLC
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top