Hello, I have worked earlier with Arduino but we are using PIC controller boards for creating pressure monitoring system for air compressor piping which are used in manufacturing industries. Rather than going with same old analog product we are thinking to give a try with some new recommended wireless pressure sensor which are best to create wireless private connection but need some suggestion to mak it work with PIC, interfacing this kind of sensor package is something very different and advice to interface this will be much helpful.
as far as I can see it uses I2C interface.
Nothing special. Maybe used in millions of PIC applications. Often discussed here in this forum.
It has nothing to do with wireless.
Please read through I2C specification.
Read through the sensor datasheet.
Read through the PIC datasheet.
Do a research here in this forum and/or in the internet.
If then still is something is unclear, please ask a detailed question.
That is more like it with 203 max PSI.
Typically measuring pressure inside a pipe, you have a sensor in a pipe fitting that goes into the pipe. Wires from that sensor go to the gauge or transmitter in your case. I don't see any external sensor on that unit. It looks like it measures ambient pressure around the transmitter unit. How is that going to measure pressure inside the pipe?