Jordon
Member level 1
- Joined
- Dec 25, 2022
- Messages
- 33
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Location
- Shanghai, China
- Activity points
- 264
Hi ,when i import design ,tring to 'place standard cells', some warning happends :
IMPDC-1151 : No instances found in the design .Check if youe design has instances other than filler cells.
And the cells are not placed.
I have tried import design without mmmc, it works ,and placed std cells.
And my mmmc ,honestly, it lack of 'QRC fils/Cap table', i cannot extract it now, but other setting is OK, like below, so, what is the possible error in my mmmc setting caused this mismatch?
the warning message is like below:
after the operation 'place std cell', no std cell happend in the layout.
Thank .
IMPDC-1151 : No instances found in the design .Check if youe design has instances other than filler cells.
And the cells are not placed.
I have tried import design without mmmc, it works ,and placed std cells.
And my mmmc ,honestly, it lack of 'QRC fils/Cap table', i cannot extract it now, but other setting is OK, like below, so, what is the possible error in my mmmc setting caused this mismatch?
the warning message is like below:
after the operation 'place std cell', no std cell happend in the layout.
Thank .