Uggiebear
Newbie level 2
- Joined
- Mar 26, 2013
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,296
I have been told this is where i should post this topic.
I am wanting to build a can bus system for a non can bus motorcycle.
I would like to be able to monitor a Lambda sensor various temperature sensors and a fuel pressure sensor and a boost sensor.
What i was thinking was an independent Can Bus system linked to a OBD2/can bus wifi unit and then i can run an android app on my phone to display the readings.
All i want is monitoring no control.
I have a very basic grasp of this and would like some pointers and a little help. I have seen this mentioned a few times but nothing is readily accessible, probably down to the fact Can and Bus are not helpful search words.
Any help would be greatly appreciated.
Kind regards John
I am wanting to build a can bus system for a non can bus motorcycle.
I would like to be able to monitor a Lambda sensor various temperature sensors and a fuel pressure sensor and a boost sensor.
What i was thinking was an independent Can Bus system linked to a OBD2/can bus wifi unit and then i can run an android app on my phone to display the readings.
All i want is monitoring no control.
I have a very basic grasp of this and would like some pointers and a little help. I have seen this mentioned a few times but nothing is readily accessible, probably down to the fact Can and Bus are not helpful search words.
Any help would be greatly appreciated.
Kind regards John