Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
i have an IC Fixed to a board it has 2 number the first one P926 the second one has b729 did anyone knows about the function of this IC and if there is an alternative IC for replacement
i have an IC Fixed to a board it has 2 number the first one P926 the second one has b729 did anyone knows about the function of this IC and if there is an alternative IC for replacement
Hai ralraii... I have also searched a lot in the net but cudn't find it... I have also seen it in the vehicle tracker your picture corresponds to, but NOT understanding the function of P926, so that at least I can replace the chip from the dead tracker. My chip's part number is P926 B045.
Do let me know incase u find any fact regarding this chip...
Thanks in advance...
i have an IC Fixed to a board it has 2 number the first one P926 the second one has b729 did anyone knows about the function of this IC and if there is an alternative IC for replacement
The chip is L6926D from STmicroelectronics. Its a Buck regulator that can convert voltages in the range of 2.7V-5.5V to as low as 0.6volts. In your application (vehicle tracker, as shown in the attached picture), it is converting 5volts to 4volts for the GSM module. Incase you are unable to find the datasheet, i will attach the same for you...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
