Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

IC compiler 2005-install problem

Status
Not open for further replies.

sc266

Junior Member level 3
Junior Member level 3
Joined
Aug 5, 2005
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,461
ic compiler installer

I have problem with IC compiler 2005. Here what I have in the package:
dcm_script dcm_script_hp32
dcm_script_rs6000
dcprocheck_exec_script install_dc
install_icc
install_icc_shell
install_lc
install_mc
install_psyn
install_vhdl
setup_astro_env_script
setup_icc_mw_env

When I run ./ install_icc, it ask me that

Synopsys root directory [ /usr/Synopsys/IC_COMPILER_2005_12_SP1 ]:

I enter /usr/Synopsys (my install directory) and it show up

/usr/Sysnopsys/admin/setup/.synopsys_dc.setup not found.

Synopsys root directory [ /usr/Synopsys/IC_COMPILER_2005_12_SP1 ]:

Can you tell what the problem is?

Thanks and Regards
 

milkyway installation site:edaboard.com

Am I alone in this forum?
 

synopsys installation

You should use the installer (synopsys's software for installing their products) to install ICC.
 

synopsis, ic compiler, setup

Yes, I have Synopsis installer but I don't know how to install it. Would you please let me know steps to install it.
Thanks
 

synopsys milkyway

You can run the installer's GUI through the command "SETUP.SH". And then you can go to the directionary of ICC and select the ICC packge in the GUI.
 

milky way installation+ic compiler

Thanks for quick response. But it ask the CD number or key number of this CD, honestly I don't have it. If I skip this step, it automaticly close. Do you know how to skip that?
THanks
 

how to install ic compiler

You can try "0000".
 

ic compiler install

your package is wrong platform
 

Make sure to use the package appropriate with the OS
 

When I type ./install_icc I get a message telling me: "The ICC installation is not complete without Milkyway".
How can I go through this, I tried to download Milkyway from Synopsys site but a license is required.

Could you please tell me where to find the Synopsys Installer, the url indicated by synopsys doesn't exist anymore !
 

It seems that the package you are using is not the original one. Please run cksum to compare the CRC number.
 

the crc number seems fine.
 

Could you please tell me where to find the synopsys installer ?

me to
 

You can find synopsys installer in here:
**broken link removed**

But the installation doesn't finish successfully, it says that I need Milkyway installation.
 

Hi Team,

Can some one help me the procedure to start off with the design in ICC with out milkyway... I am not able to go beyond create_mw_lib.

Plz help with the sample script to do the complete flow.


thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top