Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ic 8038 sqare wave gnerator designing

Status
Not open for further replies.

PAVITHRA LINGAREDDY

Newbie level 1
Joined
Jul 7, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Using an 8038 IC waveform generator, design a pulse generator to produce a positive pulse with pulse width of 100 micro seconds and a pulse repetition of 1 KHz. The output amplitude is to be approximately 10 V.
 

Hope this files helps you.
you must read data sheet it will give you all answers
Regards
 

Attachments

  • icl8038info.pdf
    140.5 KB · Views: 106

It sounds unreasonable to use an ICL8038 for a square wave generator:
- it isn't an active product, you have to rely on expensive second source vendors or antique parts dealers
- a simple 555 timer can do better
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top