Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

i2c communication using pic and suppling power to the microcontroller

Status
Not open for further replies.

nikhilt007

Member level 2
Member level 2
Joined
Jun 6, 2012
Messages
50
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,288
Location
Mumbai ,India
Activity points
1,559
Hai

here i want to transfer data from one master to slaves through only two wire and at the same time i want to supply power to my slave microcontrollers through the same wire

ie the logic is that totaly iam using 15v for i2c communication in those i want to use 10v for powersupply to microcontrollers
and rest 5v for my i2c communication
please help me how to achive these
8-O
 

which is the pic microcontroller you are using and

which is the i2c device............
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top