Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

I want to design millimeter wave antennas

Status
Not open for further replies.

sree479

Member level 2
Member level 2
Joined
Jul 29, 2014
Messages
42
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Location
nagpur
Visit site
Activity points
1,527
I want to design millimeter wave antennas for obtaining my PhD degree. my freqquency of interst above 60 GHz. Please tell me appropriate softwares at these frequencies. please Give some necessary advice..
 

I have used CST Microwave Studio. You can also use FEKO and HFSS but, personally, I don't have an idea about the latter two as I have not used them.
 
Get a copy of IEEE microwave magazine (any issue) and you will find advertising for 10 different EM simulation tools.
Get a copy of IEEE microwave magazine (vol. 9 number 6, Dec 2008) for a nice overview of different EM simulation techniques.

For your PhD work, start researching the different 60GHz antenna topologies (what type used where, and why).
 
  • Like
Reactions: sree479 and FvM

    FvM

    Points: 2
    Helpful Answer Positive Rating

    sree479

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top