Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I want to build a small circuit board? But I require some help?

Status
Not open for further replies.
X

xCROSSAx

Newbie level 2
Joined
Jan 30, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
My plan is modifying a Xbox 360 console(phat), to add a extra SATA port by desoldering the internal Hdd connector, i have the pin out of voltages but i would like to solder headers from the pin out on the motherboard (the right side as that is the pin out for SATA data) and solder a header socket to a small circuit board and then solder a SATA data port on the circuit board, but the thing that is bothering me i whether or not i will need to solder any resistors on the circuit board i will then find voltage sources to wire a SATA power connector to power a hard drive.



 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top