Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

i need program with matlab for antenna

Status
Not open for further replies.
S

star22

Member level 2
Joined
Feb 19, 2005
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,588
hi freinds
i need program with matlab for antenna simulation that in first of program get "L" and give "E" and "H" and drawing "E" and "H" and get "f" and give antenna pattern 1D and 3D and get maximum input current (phase and amplitude) and give "radiated resistance" and directivity and drawing current of antenna . and if move feeder from middle of antenna to desire point all above parameters calculate again.
please guide me
thank you for your help
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top