Hello,
I need to help in my project, please!
my project is a washing machine controller, but I'm having a problem with the c code .. if someone can please help me .. I have attached a circuit diagram of the my system.
I have developed some of the code in c, but I need someone can help with the rest I would appreciate it.
please contact me by email on my profile and I will show u the code
Basically these are the main operation of the washing machine:
1. Start- the machine is turned on
2. Input – the user inputs instruction from the main menu display and a 4 button keypad.
3. Checking Door sensor - if an instruction is set the system will check to make sure the door is locked. This is done by controlling a relay.
4. opening the pump for water input using a relay.
5. Checking the water temperature using an DS18B20.
6.Checking the water level when it reaches to max with a comparator (LM211N)
7. Generating Error Messages - if not it will display an error message.
8. Operation - if it is locked then the washing instruction will start. using two relays to control the motor by clockwise and anti-clockwise
9. At the end the system will either generate a message that the washing is completed.
Basically these are the main operations of the washing machine. I have wrote some of the code .. I just need someone to help me with the rest.