Hspice waveform problem

Status
Not open for further replies.
A

an_82

Member level 2
Joined
Oct 6, 2013
Messages
52
Helped
7
Reputation
14
Reaction score
7
Trophy points
8
Location
Delft, Netherlands
Activity points
303
Hello all,
I simulated a circuit in HSpice 2008. The problem is that the output waveform is not accurate and is segmented. Please see the attached picture.
I used smaller step in .tran analysis, but it does not correct:

.tran 1n 2u

This problem does not exist in Hspice 2003.


 
Last edited:

Hard to say without seeing a circuit or waveform time scale. Besides minimal transient time step parameter, the result many be also affected by absolute and relative accuracy parameters. Different default parameters may cause the version difference.
 

FvM said:
Hard to say without seeing a circuit or waveform time scale. Besides minimal transient time step parameter, the result many be also affected by absolute and relative accuracy parameters. Different default parameters may cause the version difference.
Click to expand...

Dear FvM,
I increased the time (lower frequency), but it does not change. It is interesting that the same Netlist is simulated correctly in 2003 !!
 

Minimum Time Step parameters should be changed.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…