How to write C coding for 8051 microcontroller that can be compiled by SDCC

[buts101]

8051 C coding SDCC

I'm thinking of doing a project on "electronics dice". I got

the idea from this site **broken link removed** ,

which uses NUTCHIP (i never heard of this chip,so i don't know if I

could get that chip and programmer on the market). So I like to do the

same project using 8051 microcontroller (I have the programmer kit of

8051). I like to write program for it in C, and compile it by sdcc.

But I don't know how to write C coding for 8051 microcontroller.

So please help me writing C code by providing me with the sample

coding for 8051 microncontroller which can be compiled by sdcc

compiler and also the instructions or command used in 8051 C Coding.

Thanks in advance.

 

[Maverickmax]

8051 sdcc

Hi

I advise you to use Keil Software because it is free and easy to use.

There are plenty of C programming tutorials in EDA E-books Upload/Download section.

If you need further help, please PM me asap and I am happy to assist you asap

Maverick Max

 

[syrax]

sdcc usb bootloader c8051

SDCC suck's sorry for this but i think sdcc is no good compiler

 

[smercho]

interface sdcc 8051

well..as far as SDCC is concerned, it can be learned easily .
I programmed a TUSB3410 using sdcc n it din give much trouble ..
i'll dig out the code frm my disk if u need it ...

 

[buts101]

programming 8051 using sdcc

u can post the coding for sdcc...it will be helpful for learning sdcc...
and one thing..after making hex file from sdcc..how do i burn it into 8051..plz write the link where i can download the link?

 

[smercho]

8051 clock sdcc

well..the code was more or less a c code ..but using some standard symbols n notation ..i'll post it as soon as i find it
..i converted the hex file to a binary(using a unix utility called hex2bin) and then binary was loaded in to the chip using a bootloader program thru USB port ..ryt now ..im caught in some work..try googling u'd find hex2bin easily

 

[sci-3d]

keil sdcc compiler

I use p89v51 and SDCC interfacing varius device, LCD, RTC, ADC, I2C, EEPROM

https://mcu-programming.blogspot.com

 

[coolroy]

sdcc step motor

Does anyone know of the performance differnce between using MSP430 and the relic 8051

 

[arnab.bhaumik]

sdcc keil port

hi all,
SDCC is really good. for past 5 months i am using sdcc professionally. i used sdcc with atmel at89c52. it works nicely. everybody knows that keil c is better than sdcc (compact size and industry standard) but i comes at a cost where in india one us doller is plus minus equal 50 indian rupee. so here the actual price of keil is =(ACTUAL PRICE) * 50

i used sdcc for 1) stepper motor interfacing (Project: Color mixing machine
2) wireless Motor and Volume Control unit (dont know but surely it was some defence project(because of its military grade specification) means for phellipines )
3) Fire alarm System
4) interfacing with AD7730 (currently working)

so all in one sdcc is a good choice
arnab

 

[mymadi]

writing programs for 8051 using sdcc

SDCC ****'s sorry for this but i think sdcc is no good compiler

I was used the SDCC and my opinion is good butt... the hex code generate is bigger than keil... but i will say its good...

 

[mgajo]

writing c code compiler sdcc

Hi

1. SDCC is very good compiler for money you pay for it

2. Keil and IAR are better but they cost a lot.

3.Atmel has the new range of 8051 ,very fast one clock instruction
execution ,also new programming interface so you dont
need complicated programmer
4.Please visit Atmel site for info