Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to use Spice to plot the DC transfer characteristic ?

Status
Not open for further replies.
T

thisnot

Junior Member level 1
Joined
Oct 6, 2004
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
105
pspice

how do i use spice to plot the dc transfer characteristic of a circuit? anybody know of sites with good examples? thanks
 

Re: pspice

Hi,

You need to read the relevant chapter of pSpice User's Guide. If you dont have this document, here is a link (the file is about 14Meg) :

h**p://faraday.fie.umich.mx/titulacion/pspice/document/pspug.pdf

* = t
 

Re: pspice

thisnot said:
how do i use spice to plot the dc transfer characteristic of a circuit? anybody know of sites with good examples? thanks
Click to expand...

I would do .tf analysis for dc transfer characteristics. It will even give you Zin and Zout. Look at the index for tf.
 

Re: pspice

VIC 5 0 DC 0 (common mode voltage between node 5, 0)
.
.
.

.OP
.DC VIC -2.5 2.5 .1 (sweep VIC from -2.5 to 2.5 with step size of .1 volts)

then plot whatever you want.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top