How to use FPGA generate the digital sinwave code to dac?

kivvzhou · Sep 28, 2009

Hello,guys. Now I need use FPGA to generate the 12bit digital sinwave code (that mean the 12bit digital code restore to analog signal is a sinwavw)to control dac to test my dac SNR and SNDR, anyone can give me some suggestion how to generate this 12bit digital code use FPGA? thanks!

FvM · Sep 28, 2009

Most DDS designs use a lookup table, with or without interpolation.

farhada · Sep 28, 2009

I agree with FvM,
You can create a simple lookup table for 1/4th of your sinewave, then repeate it 4 times up and down to get the correct sinus output values.

The size of the lookup table depends on your frequency.

Take a look at this Xilinx App-note for some ideas on how to do it:

https://www.xilinx.com/support/documentation/application_notes/xapp448.pdf

FvM · Sep 28, 2009

Re: How to use FPGA generate the digital sinwave code to dac

A previous thread, that shows how a lookup table can be generated in VHDL code:

shitansh · Sep 29, 2009

Re: How to use FPGA generate the digital sinwave code to dac

hi,

I have generated different waves (sine, saqare, trialngle and sawtooth) and displayed on OLED display in my projecy refer this pdf.

http://www.actel.com/documents/M1AFS_EMBEDDED_KIT_Webserver_UG.pdf

--
Shitansh Vaghela

How to use FPGA generate the digital sinwave code to dac?

kivvzhou

Junior Member level 1

FvM

Super Moderator

farhada

Advanced Member level 2

FvM

Super Moderator

shitansh

Full Member level 5

Similar threads

How to use FPGA generate the digital sinwave code to dac?

kivvzhou

Junior Member level 1

FvM

Super Moderator

farhada

Advanced Member level 2

FvM

Super Moderator

shitansh

Full Member level 5

Similar threads

Privacy & Transparency

Privacy & Transparency